The COVID-19/Omicron epidemic in Hong Kong is severe. In order to protect themselves, the citizens are rushing to buy masks, quick test kits, and piridine, and blood oxygen detectors have also become one of the targets. This time Lohas Elderly introduces a cost-effective finger clip oxygen saturation detector.
|Test results||health condition||Proposal|
|More than 98%||normal||Do not exercise vigorously|
|94%-98%||mild hypoxia||intermittent oxygen supplementation|
|Below 94%||severe hypoxia||continuous oxygenation|
Blood oxygen pulse rate・Accurate measurement at your fingertips丨Compact and portable丨Gravity sensor|automatic shutdown Finger clip pulse oximeter YX306
- accurate measurement
- Gravity sensor
- one key operation
- Small and portable
- Non-invasive and painless
- Automatic withdrawal
The measurement is more sensitive and accurate. The structure of the silicone shading layer is optimized, and a more delicate shading design is adopted. The signal transmission quality is better and the measurement is more sensitive and accurate.
Non-invasive and painless blood oxygen measurement eliminates the pain and annoyance caused by traditional blood gas analysis. It is not limited by time and place, and blood oxygen can be measured easily.
Health Monitoring Pregnant Women Monitoring Exercise Fitness Plateau Hiking
Small and portable one-button quick test
One-key operation, 8 seconds to display the test result. Intimate lanyard design, light and easy to carry.
Gravity sensing, four-way display
Reading is more convenient Using a three-axis accelerometer sensor, the screen display automatically switches with the change of the gesture direction, making reading more convenient.
HD big screen
OLED display, high brightness and wide viewing angle, clearer screen.
Flexible opening and closing angle
Comfortable for fingers of different sizes.
Dustproof and waterproof
It can prevent minor domestic splashing water, making it more secure to use.
Built-in silicone membrane
Ergonomically designed to fit your fingers, soft and comfortable.
Shut down in 8 seconds without fingers, saving energy.
Please read the product manual carefully or purchase and use it under the guidance of medical staff. Please refer to the manual for contraindications or precautions. Please refer to the instructions for contraindications or precautions; please read the product instructions carefully or purchase and use under the guidance of medical staff
In order to ensure the accuracy of the test results, please try to use the product indoors after the reading is relatively stable. Keep the instrument stable when using it away from strong light sources and infrared devices. Please replace the low-battery battery in time to obtain a better experience* Reminder: In view of the technical principle of this product, it is recommended to use this product indoors to improve the accuracy of measurement.
Oximeter VX306 Battery Installation Instructions
The installation sequence of YX306 battery is different from that of other electronic products. The two batteries of YX306 are installed in opposite directions. Please install the positive and negative poles of the battery in line with the "+" and "-" inside the product body to avoid failure to boot after installing the battery. , when it cannot be used normally.
- Display mode: OLED display
- Measurement accuracy: blood oxygen saturation is +/-2% in the range of 70%-100%; pulse rate is 25bpm-250bpm, measurement error is +/-1% or +/-1bpm, whichever is larger
- Working current: <=40mA
- Dimensions: 60 x 38 x 35mm
- Weight: about 38g (without battery)
- Made in China, or contain simplified Chinese packaging and instructions
- Due to the fact that the size is all measured by hand, there may be slight errors, please refer to the actual product
- Or contain simplified Chinese packaging and instructions
- The design is safe, non-toxic and odorless. The special wear-resistant surface treatment is not easy to be stained with dirt, and it is easier to clean. In addition, the concave-convex design is helpful for anti-slip and fixation.